SolidWorks湍流噴注噪聲仿真

工人師_OgIOQ

SolidWorks2017SP2帶來兩個更新，一個是將SOLIDWORKS 3D Interconnect由beta版變成正式版，并且是默認開啟。
另一個就是SolidWorks Flowsimulation2017SP2 增加了聲學仿真項目

還有，在必將到來的SolidWorks Flowsimulation2017SP3更新中
The Noise Prediction is available with SOLIDWORKS 2017 SP3. The acoustic Power Level is calculated with Proudman formulae, one of the known steady-state approach in CFD. The Proudman’s formula gives an approximate measure of the local contribution to total acoustic power per unit volume in a given turbulence field.


8 G* n" m6 b& R9 C9 S

This can be used to estimate broadband noise generated by turbulence.

Available results include the Acoustic Power, in W/m^3 and the Acoustic Power Level, in decibel (dB).

并且已經有了實際應用

http://player.youku.com/player.php/sid/XMjcxMTY2ODA2MA==/v.swf

xiaobing86203

分析軟件還是專業的靠譜吧

工人師_OgIOQ

xiaobing86203 發表于 2017-4-18 08:49
分析軟件還是專業的靠譜吧

solidworks flow simulation本身就是相當專業性的CAE軟件，見識少，要加強學習。

工人師_OgIOQ

Solidworks 2017SP3
3 Z3 d2 L9 B$ N9 f1 n6 b$ v


0 M- V7 @' C9 P/ M8 W; k5 n* M

胡楊_eLN6l

好確實好非常好你看著給

moldzsdj

學習了，。。。。。。敬仰